Beiträge von geofffc

HI,
Has taken a while (family).

Have just done measurements. 06:50hrs

1. Wall socket start 244

16. V3-1. 283
17. V3-6. 284
18. V3-3. 11.97
V3-8. 11.98

20. Wall socket end 249

Thanks,
Geoff.

Hi Martin.

I have swapped resistor for a 390ohm 2w as suggested.

Having checked the readings at several different times I get the following variances at home.

The home power supply has varied between 244v and 255v on my meter.

This results in a variance of between 8.42w and 8.7w depending on the input voltage.

Although much improved, is this now considered useable or should I go further?

Thanks,
Geoff.

Thanks for the info.
I will update when done (may be a little while yet).

As an addition to previous post here is a copy of voltages.

Hi there from a new member.

I have just finished building a madamp G3.
On testing I have found that my house voltage is 250vac.
The heater voltage is 6.6 which is fine.
Br1 is 232vac.
All vdc readings are high and I would like to know if it is ok to use.

Thanks in advance.
Geoff.