Beiträge von Acursed

The effect it working again after replacing the faulty resistor.
Thanks for your help!

There is one resistor that i suspect is broken and i ll replace it at some point.

I dont know what kind of voltage measurements should I get when testing the chips while the pedal is on.

I measure the voltage on the components but I dont know if I have the right result... (or what range of values should I expect)

Ohh ok

Have done that already

Thank you

Hello SlB

I am running out of ideas.
How can I readjust the trimpots?

Thanks in advance

Thanks for your answer!

Resoldered some resistors and the foot switch. One of the resistors lost a part of the shell and its exposed.
Now the pedal cuts off the sound when turned on.
I am expecting a delivery of resistors in the next days and i ll replace the damaged part but I am very close to call it a dead project

There is voltage on the IC so I guess it is working.
I checked continuity on the trimpots and everything looks fine

I ll keep you posted.

Hi and thanks for all your suggesttions.

I resoldered almost everything and now the noise i gone but the effect is not working when turned on
It just gives a light boost to the volume but no reverb...

The IC is sitting very well in the socket.

Any ideas?

Hello

I put together 3Verb a couple of days ago and everything went smooth. The pedal worked like a charm for two straight days but suddenly died.
When I turn it on it produces a terrible noise (refer to the video bellow).

Any ideas what the problem may be?

Thanks in advance!

I discovered a problem with the wiring.

It works fine now.

Hello

I just put together The Breaker and the circuit works outside the enclosure.
When I move everything inside the enclosure there is no signal to the amplifier. Nothing not even hiss.
After multiple tests i realised that the problem happens when i mount the output on the enclosure.

How can I fix it?

Thanks!!

It seems I missed that.

Hello!

I decided to jump into the pedal diy world and I chose "The Electra" distortion as my first build.
Unfortunately the user guide is dated and there is not such a good description regarding the wiring.
Need to mention that the kit came without 3PDT pcb...

Any chance to find an updated wiring guide?

Thanks in advance.