Beiträge von MrW

  • 4 Ohm speaker

    Hi!

    I've now finished wiring my A15MK2 and I now need to test it. In the manual it says i need a 8Ohm speaker. Can't I use a 4 Ohm speaker when it have a 4Ohm output?.. That's the only cheap speaker i have layin' around that I can use for testing...

    Thanks,

    William

  • Input jack A15MK2

    Zitat von mceldi;341123

    Hi!

    The manual tells the truth. Obviously you've mixed up the connections of the jack. Leave ground as it is and switch the other two (I persume one cable and a resistor).

    Cheers
    John

    I can`t understand how I`ve done it wrong. In the layout plan as well as the schematics, it shows that the resistor R1 is "after" the jack... This is the same thing I`ve done. Therfor i can`t see how the manual is right....

    EDIT: Ah! I see it now! But then my jacks are opposite of the ones used in the pictures manual.... Wierd

    Thanks.

  • Input jack A15MK2

    Hello!

    I just finished wiring the input jack in my A15MK2. In the manual it says I should measure 1MOhm when jack-cabel is inserted and 0Ohm when not connected... Im pretty sure i've wired correctly, but i measure the opposite of what it says in the manual! It measures 1MOhm when no cabel connected and 0Ohm when connected. Is it wrong in the manual, or am I doing something wrong?

    Thanks