Corvus Fuzz wiring help needed

dbhowmik

I am building my Corvus Fuzz pedal and am unsure how to connect the small board to the big board. In the instructions 1A on the small board obviously connects to 1B on the big board, 3A on the small board has pads GRD, GRD, PCB OUT but 3B on the big board has pads NC, NC and OUT. Does NC connect to GRD? Also 2A on the small i presime connects to 9v+, Jack IN tip, Jack OUT tip, but where to the jack sleaves connect to?. Could some please help me by confirming the wiring.

Here are the instructions: https://aionfx.com/app/files/docs/corvus_documentation.pdf

thanks for your help

David

thepedalarchitect · Screenshot 2022-03-26 110346.jpg

Hi,

just simply follow the instructions - if you don't need a battery simply omit battery plug :

1. Connect ground of input and output with ground of DC-Input and ground of footswitch board.

2. Connect ground of footswitch board with ground of mainboard.

3. Connect V+ of your DC-Input with V+ of your footswitch board.

4. Connect V+ of footdwitch board with V+ of mainboard.

5. Connect PCB In of footswitch board with In of mainboard and PCB Out of footdwitch board with Out of mainboard.

6. Connect Inputjack with Inputjack of yor footswitch board and Outputjack with Outputjack of yor footswitch board.

That's all

dbhowmik

Thanks thepedalarchitect. Ive put it all together and it works great. This is my first electronics project so I really appreciate the help.

thepedalarchitect

Great. Have fun.

Corvus Fuzz wiring help needed

Jetzt mitmachen!

Ähnliche Themen

Question about measured values (esp. 18 & 19) of my recent G3-Blues build!

Plate blue wire from OT

The Foxx Octave Fuzz not working properly