Hello ,
Anyone have schematics for the BBE Sonic stomp Sonic
Maximizer?
Best regards
Looking for BBE Sonic Max
-
kajek -
24. Mai 2005 um 19:01
-
-
Re:Looking for BBE Sonic Max
The schematics won't help because there the complete circuit is designed to use a very special integrated circuit (manufactured exclusively for BBE).
It's hard to get such IC - even if you need to replace on in an original effects unit.
I had this problem about two years ago - contacted all local supports in every european country and finally got one (I think from the greece distributor) but this took more than a year...
Greetings
Andy
-
Re:Looking for BBE Sonic Max
Hi,
macht der BBE Sonic Maximizer eigentlich soviel inner Loop eines Amps aus? Viele schwören ja drauf.
Ich hatte mal n EQ inner Loop, was eigentlich voll kagge war. Was macht den der BBE genau (ja ich weiß, is kein EQ
)?Kenn den nur als Plugin, was Hammer ist. Simpel und effektiv.
Gruß, Markus.
-
Re:Looking for BBE Sonic Max
Hi Andy,
Thank you for reply and please check this info.
Regards[gelöscht durch Administrator]
-
Re:Looking for BBE Sonic Max
Zitat von vp-zero
Hi,macht der BBE Sonic Maximizer eigentlich soviel inner Loop eines Amps aus? Viele schwören ja drauf.
jop, schon ziemlich. dezent eingestellt, kann man einiges aus dem sound rausholen. wenn mans übertreibt, klingts extrem künstlich.
ich selbst bevorzuge eher n guten eq im loop, damit erziehle ich bessere ergebnisse.
n maximizer ist glaub eine kombi aus compressor/eq/exiter
mfg kusi
-
Re:Looking for BBE Sonic Max
Hier ein paar bilder von BBE Sonic Maximazer "SONIC STOMP"
http://forum.musikding.de/gallery/albums…ic-Stomp-01.jpg
http://forum.musikding.de/gallery/albums…ic-Stomp-02.jpg
http://forum.musikding.de/gallery/albums…ic-Stomp-03.jpg
http://forum.musikding.de/gallery/albums…ic-Stomp-04.jpgcheers
EE.
-
Re:Looking for BBE Sonic Max
Hello electric-eyes,
Thank you for nice job.
Regards.
Kajek -
Re:Looking for BBE Sonic Max
ist das deiner @EE?
wenn ja, zeichne bitte das schematic ab! das ding ist ja sehr einfach aufgebaut, da sollte das kein problem sein...

ich würd mich freuen ;D
mfg kusi
-
Re:Looking for BBE Sonic Max
Hello,
I never have found a distributor for the NJM2153.
I`ve tried digikey, but there is not available.But, please try this : :o
http://www.radio-flier.com/PDF%20Files/BBE%20482i.pdf
I think, this is very interresting.
Good luck! Floh
-
Re:Looking for BBE Sonic Max
Hi Kajek and Kusi,
schematics are also avialable on the BBE website :P, too :
Sonic MAximizer 428I ;D
Page 12- 15 :
http://www.bbesound.com/pdfs/482i_manual.pdfMaximizer 362 :
( Page 12-13 )
http://www.bbesound.com/pdfs/362_manual.pdfand last, but not least :
BBE 882I :
( Page 13-16 )http://www.bbesound.com/pdfs/882i_manual.pdf
more schematics are here :
http://www.bbesound.com/support/index.asp
Read the index of the pdf-manaul and you can find a schematic .
Bye.Floh
-
Re:Looking for BBE Sonic Max
Hi Flomesh,
Thank you for your help.
I guess that all IC made only for BBE application
and it is very difficult to find in public supplier(like Digikey and others).
In BBE Sonic Stomp IC is as BBE 2150 A( dedicated for guitar effect) and power supply is 9V battery.
Regards. -
Re:Looking for BBE Sonic Max
Hi Kajek,
I`m only seventeen years and I do not have so much experiences in designing analog curcuits,
but when take a look at the block diagramm , I think it could be possible, to make
a anolog cuircuit like the NJM by using NE5532 ??? op-amps.Block diagramm :
http://www.njr.co.jp/e08/aud_2153_e.htmlI checked out some public suppliers in Germany,
but this senseless to order 4 or 5 pices of the NJM, because the taxes and shipment are to high. ( maybe more than the NJM costs )Tschau.FLOH

-
Re:Looking for BBE Sonic Max
hi flomesh,
cool, das hab ich ja voll übersehn...

mal BBE anschreiben, vielleicht versenden sie ja ein paar IC`s, da mein maximizer defekt ist und ich ihn selbst reparieren will....
;Dmfg und danke
kusi -
Re:Looking for BBE Sonic Max
Kusi,
veilleicht nutzt die das was :
http://www.njr.co.jp/e_frame/ef_03_04.htmlscroll runter zu Germany und such die Firmen mit google

Wenn dein Ding kaputt ist, vielleicht ist es besser denn zurück zu schicken .. ???
.Floh
-
Re:Looking for BBE Sonic Max
Hi FLOH,
Please check this link http://www.1stelectronicsinternational.com/IC for BBE Sonic stomp is NJM 2150 AD
and this linkhttp://www.digchip.com/datasheets/par…0/NJM2150AD.php
Regards
-
Re:Looking for BBE Sonic Max
Zitat von flomeshAlles anzeigen
Kusi,veilleicht nutzt die das was :
http://www.njr.co.jp/e_frame/ef_03_04.htmlscroll runter zu Germany und such die Firmen mit google

Wenn dein Ding kaputt ist, vielleicht ist es besser denn zurück zu schicken .. ???
.Floh
danke.
das mit dem kaputten maximizer war ironisch gemeint. ;D (ich brauch doch n vorwand....=
mfg
-
Re:Looking for BBE Sonic Max
@ Kajek,
for a few minutes a tried sites like this :
http://www.nowcomponents.com/item1/page.cfm/2626
and much more.
Please sorry,
but today semiconductors have only a political price.
And when I buy a NJM ( I appraise maybe 5 or 6 € per piece ),
then I pay more for the shipment and taxes.I try this sites :
http://www.njr.co.jp/e05/njm_e.html
now click on " Business overview" , then on " sales network "
and look, if there is a distributor in your country.Tomorrow, i will ask my teacher for a design of the NJM 2150 with Ne5532.
Best regards.Floh
-
Re:Looking for BBE Sonic Max
Hi Floh,
Thank you for info.I think that you can't design new circuit as NJM2150 with NE5532.
NJM2150 is design as sound processor.
You can of course try to do it but manufacturer of ic they did a lot of research to eliminate noise in the structure.
Best regards.
kajek -
-
Re:Looking for BBE Sonic Max
Hi Jungs
;D Yes, der BBE Sonic Stomp habe ich vorgestern per Post aus amilandia bekommen.
Die Chips sind:
1x TL072CP
1x BBE 2150AD JRC A4151Calle andere Komponenten wären erhältlich
Der erste ist überhaupt kein problem zu kriegen. Der zweite ist die grosse Frage :-\
Falls der BBE 2150AD JRC A4151C käuflich wäre, muss das Schaltbild jemand anderen erstellen, sorry! ich bin farbenblind und ich würde sehr ungern alle Wiederstände abmontieren, um sie abzumessen.
Aber ich bin sehr kooperativ!!!
Cheers
EE.
-
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!