Accutronic Hallspirale identifizieren

  • Hi,

    ich habe zwei Accutronic Hallspiralen über die ich hier http://www.accutronicsreverb.com/
    so nichts finden konnte. Ich nehme an, zum identifizieren orientiert man sich am aufgedruckten Code.
    Auf meinen steht 4FB2AIC.
    Vermutlich sind die zu alt für die Authentifikation bei accutronicsreverb. Oder ich gucken faltsch.
    Ausserdem steht noch 30 76 (Jahrgang?) 260 und 23572-0
    Ich bräuchte die Impedanzwerte.

    Danke und Grüzze
    Philipp

  • Hallo,

    4 = lange Form, 2x2 Federn
    F = Eingangsimpedanz 1475 Ohm
    B = Ausgangsimpedanz 2250 Ohm
    2 = mittlere Nachhallzeit 1,75...3 s
    A = Ausgangs- und Eingangsbuchse geerdet
    1 = keine Verriegelung
    C = senkrechte Montage, Buchsen nach oben

    Gruß, Bernd

    Jaichweiß (Andy Pipkin)

  • Hi,

    ist doch ganz einfach ... man nehme den Code

    1. Stelle
    Reverb Type 4 (the Type 4 is still manufactured today using Hammond’s original design. Four counter wound and coupled springs deliver superior mechanical performance and the classic sound that helped make the Fender Twin Reverb Amps famous. Outer channel dimensions are 16.75” Length x 4.375” Width x 1.313” Height.)

    2. Stelle
    INPUT IMPEDANCE F = 1475 Ohm

    3. Stelle
    OUTPUT IMPEDANCE B = 2250 Ohm

    4. Stelle
    DECAY TIME (Ausklingzeit) 2 = Medium (1.75 to 3.0 sec)

    5. Stelle
    CONNECTORS (Anschlüsse) A = Input Grounded / Output Grounded

    6. Stelle
    LOCKING DEVICES (Feststeller): I(1) = No Lock

    7. Stelle
    MOUNTING PLANE (Montageart) C = Vertical Connectors Up

    Noch Fragen?


    Gruß
    Häbbe

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!