Hi
I orderd an built a Lineal kit. But... No effect.
In bypass its ok i get my regular signal.
But a soon as i activate its gone. The led does light up though.
Any suggestions of things i should check?
I already checked and double checked dozens of times but i cant seem to find the problem...
Re: Lineal - Problem
hi marten
check your tranny, if it is put in correctly, have u checked the jacks?
here you ll find the wiring schem. http://diy.musikding.de/berichte/eff/d…r/layoutlpb.jpg
and here this for different jacks:
http://diy.musikding.de/images/buchsenerkl%E4rung.jpg
maybe you should once again
greetz
andy
sorry for my bad english ;D
Re: Lineal - Problem
Hi
try to switch the Input / Output cable!
Regards,
Martin
Re: Lineal - Problem
Jacks checked and its connected the right way. My power block works fine, gives 9v. I measured that too. Trying a battery doesnt work either.
The pot i think is right. From left to right: Black, Blue, Green (yellow on drawing) I also used a mulit meter to check if everything connected. And it does.
Aargh help me!
Re: Lineal - Problem
pingufreak83 is a genius!
It works now!
Re: Lineal - Problem
Thanks! But I'm not a genius :), there are other people here which have more knowledge than I have.
This board is f.... cool :)!
Re: Lineal - Problem
I noticed the pot turns the wrong way.
As in: normally full to the right would be full gain and left no gain. But mine works vice versa. Any tip to overcome that?
Re: Lineal - Problem
Yes, look at your pot, on the back, you must change the left wire with the right wire, oh my god, my english is so bad, but i think u ll understand ;D
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!
